Garage Door Repair: Five Things to Check

Before you proceed to the repair, ensure to unplug the opener of your garage door, so that you don't get an electric shock while you're repairing the garage door. You'll probably stand on a ladder that is a very bad location to get an electric shock, because you may fall off the ladder as well. Remember to also wear safety glasses as you work with power tools.

Below is the list of things to check before you call for a professional for a garage door repair:

1. You Need to Check the Metal Tracks for any Damage

This repair garage door tip may always solve the problem quickly. The metal tracks might even have dents or bumps. If you find such damages, you can strike the damaged section of the track using a wood block and also a hammer to help in straightening the track.

2. Check Your Tracks Alignment

Now, if the tracks are not properly aligned, they may cause the door not to function. It's not often necessary for you to unscrew the tracks; just try loosening the screws and bolts and to slightly tap the tracks into position. Make use of a level in checking the alignment of the tracks. Now, aligned tracks will allow doing garage door repair Scranton PA in no time.

3. Clean as well as Dry the Tracks

Although it might sound obvious, however, old lubricant might be the cause of your garage door sticking. In this situation, your garage door repair might made up of cleaning the tracks and drying them. Use regular cleaners for you to clean the tracks well.

4. Lubricate Your Rollers and the Tracks

If you lubricate both the rollers and the tracks, it can fix the issue and conclude the repair. For lubrication, you might use a silicon spray or even a lubricant spray. It's likely better for you to lubricate your tracks after you clean them. Any movable part will also benefit from lubrication.

5. Tighten the Loose Screws as well as Bolts

Screws and bolts tend to become loose as time goes on. Try to check the entire bolts and screws involved in the closing/opening mechanism of the door. Sometimes, just tightening them might solve the issue. If you can't tighten the screws, if the holes themselves are loose, you can utilize a "wood filler" or pieces of typical wood in filling the holes.

What You Shouldn't Do

If you have tried each of the solutions above, and none of them seem to have worked, then the problem may be your door spring. But, it's advised not to do the repair if the issue appears to be the spring, mainly if it's a torsion spring. Unluckily, a lot of people got injured or killed by their garage door springs. Among the most usual injuries is a hit in the head, leading to serious trauma to the brain.

Now, if you have doubts about your garage repair, don't attempt to repair it. But get a professional who'll save you from any injuries.